|
 |
|
|
| Description |
|
Our standard 120 Volt AC LED Rope Lights are 3/8" diameter, and are a modern alternative to incandescent rope lighting. LED Rope Lights are very efficient and produce very little heat. Another advantage to LED Rope Lights is they have no filament to break.
Accessories are ordered separately (more details below). NOTE: These are to be powered by 120 VAC, such as a 120 VAC generator (or 120 VAC household power). You need to use Power Cord C (shown below), as this power cord has an in-line rectifier that is a required component (otherwise the LED's may flicker). |
|
|
Rope Light Assembly (all items ordered separately)
|
| |
|
|
|
|
Key parameters |
Size:
3/8" diameter
Cut-ability: Every 36" (every 36 bulbs)
Maximum Run Length: 328'
Bulb Spacing: 1"
Sold in 3 foot increments |
Specifications:
120VAC
0.006 Amps / foot
Recommended Air Temp Range: -4° to 122° F |
Colors:
WARM white LEDs, color temperature approximately 3000-3200k. |
| Additional information |
Installation Note: Before you install your LED rope lights, connect the power and verify illumination. Then as you do your installation, beware of which end you need to feed the power to. Why? LED rope lighting contains diodes that allow the electricity to flow in one direction only. Because of this, when you hook up power to the LED rope lighting, it may not illuminate. If this is the case, disconnect the power and reconnect it to the other end of the LED rope lighting.
Product Details: LED Bulb Color: Warm White Power Consumption (Watts): 0.70 watts per foot
Amp Draw: 0.006 Amps per foot Voltage: 120V Bulb Spacing: 1" Bulb Orientation: Vertical Recommended Air Temp Range: -4° to 122° F Cut-ability: Every 36" (every 36 bulbs) Weight: 0.125 lbs. per foot : End Cap, 120 Volt AC Power Cord "C". All related Accessories: visit the 120 VAC LED Rope Lights category page. Can this be used domestically (for household 120VAC)? Yes. It will only work if powered by 120 Volts. Do you have a different voltage? Then you need to get the appropriate product: 12 volt LED Rope Lights - 24 volt LED Rope Lights. Is this dim-able LED Rope Light? Dimming is somewhat sensitive. There seems to be a tight range where a slight change in voltage makes a big change in illumination, and a large range that has no effect. Currently we do not offer any dimmers for use with this voltage product. You may want to consider using the following products instead, provided you connect them properly and use the correct associated components: 12 volt LED Rope Lights - 24 volt LED Rope Lights. This 120 VAC LED Rope Light is priced by the foot below. It is sold by the 3 foot increment, so order in multiples of 3 feet (you can enter the quantity you need and the system will round up to an increment of 3 feet for you).
|
|
| Price |
|
|
|
|
| |
|
|
|
|
Shopping Cart - 0 item(s)
