Rigid 12 volt LED Strip Light - 24 Volt LED Strip Light with clear plastic lens.
The power cord has an inline switch rated at 2 amps. The power-feed end of the cord has an RCA plug (which you can cut off and then strip the wires to make your connection). The other end of the cord has a USB type connector that plugs into the end of the light strip. A 2nd light fixture can be plugged directly into the end of the first (and a third into the second, as each fixture has the built in USB type plug on one end, and a USB type receptacle on the other end for easy connecting in a continuous run up to 4 fixtures). Optional 7 inch extension interconnect cable. NOTE: this is a non-standard use of USB connectors. NEVER plug any standard USB device into this power cord and NEVER plug this light fixture into any other USB connector.
(USB is typically 5 volts, and this device operates from 10 to 30 volts dc).
Surface mount LED Strip Light includes 2 mounting clips that can be screwed down, then the light fixture is snapped into the clips (removes easily by snapping back out).
The Rigid LED Strip light has 42 smd LEDs for even lighting distribution across the entire length.
|
