|
|
| |
| LED Lights > LED
Bulbs |
| |
Replacement 12v LED
Light Bulbs, G4 Style, 2.4 watt, Side Entry,
dimmable*
120 Lumen LED Bulb (Warm White, Red or Blue), 12v/24v (actually accepts
10v to 30v
DC)
from
SailorSams.com
|
|
Replacement
LED Bulb with light
output comparable to a 10 watt Xenon or halogen bulb
Order below
Save energy,
reduce heat |
Side Mount
G4 LED bulb for use in horizontal socket |
|
120 Lumen Warm-White LED Bulb,
or
RED
or
BLUE
*This is
a dimmable LED Bulb
/ a specific
Led Dimmer is required:
ICM-D1205 LED Dimmer |
|
Need the pins in the back?
Rear Mount G4 LED
Bulbs |
|
Replace
this old style
G4 bulb to save energy and reduce heat: |
 |
|
| |
|
 |
|
Old style
G4 bulb |
Side
mount Replacement LED Bulb |
| |
|
|
|
Convert your existing
halogen or Xenon fixtures to LED fixtures.
Fits G4-based lights with
side entry bulb/ horizontal socket.
Do you also need Replacement G4
LED Bulbs with pins in the back? If yes, here they are:
Rear Mount G4 LED
Bulbs
Advantages of 12 Volt LED
Bulbs
• Low Energy Consumption -uses up to 5x less power
• Shockproof - has no glass or thread like regular bulbs
• Environmentally Friendly - contains no mercury
• Generates little heat - reduces amount of heat in your cabin
• Save Money -Saves Electricity and Battery Power
|
Overall thickness approximately
0.3" |
|
LED Bulb Specifications: |
|
ICM-LEDG4B
(back pin) |
ICM-LEDG4S
(side pin) |
• Power: 2.4 watts
• Voltage: 12 volt - 24
volt
(10-30 volts DC)
• Current at 12v: 200mA
•
Base: G4 (Bulb style)
• Solid State Reliability
• High Intensity, Superior Lumen Maintenance
• Well Heat Sink
• View Angle: 120 degree
• Mean Time Between Failure 40,000 hours
• NO UV, Superior ESD Protection
• Wave Length: 3300-3600
• Color Choices: Warm White,
Red, or
Blue
• Typ. Luminous Flux: 120 Lumens
(Compare to a 10W Xenon or Halogen bulb, which are typically
100 to 140 Lumens, depending on the bulb quality, the fixture, the lens,
and the quality of the reflector, if any. Also, LED bulbs are more direct,
whereas a G4 bulb emits light in all directions). |
|
What is an LED Converter?
When using LED lights on DC power that is
converted from AC Power (or when using AC-ready LED's), you may
experience noise or fluctuations in intensity. This is typically caused by
non-smooth power characteristics (such as sine wave remnants). This can usually be
resolved with an LED Converter. An LED converter not only converts AC to
DC, it also smoothes out the wave (provides superior voltage regulation),
so your LED's get what they need in a regulated dosage.
In other words, some LED's can be used
on AC power (check the specifications). Others can be used only on DC
power. The bottom line is, in either case, if your power source is AC (or
was converted from AC instead being sourced from a battery or solar cell), an LED Converter
can be used to eliminate noise or fluctuations in intensity. |
|
| |
|
|
|
Line # |
Part Number |
Description |
Color |
Regular Price |
Current Price |
Order |
|
1 |
ICM-LEDG4S
 This item
is on back-order until approximately March 30, 2010. You may order
and pay now to reserve yours. Orders ship on a first
ordered / first shipped basis. |
10-30 Volt DC,
G4 LED bulb,
2.4 watts,
120 lumens,
Warm White LED's,
Side entry pins |
Warm
White LED's |
MSRP: $29.95 |
Now $22.95
Quantity discounts:
25 or more:
$19.95 each;
50 or more:
$17.95 each
|
|
 |
|
shipping &
tax info,
Weight .02 lbs. |
|
2 |
ICM-LEDG4SB
This item
is on back-order until approximately March 30, 2010. You may order
and pay now to reserve yours. Orders ship on a first
ordered / first shipped basis. |
10-30 Volt DC,
G4 LED bulb,
2.4 watts,
120 lumens,
BLUE LEDS,
Side entry pins |
BLUE LED's |
MSRP: $34.95 |
Now $24.95
|
|
|
|
shipping &
tax info,
Weight .02 lbs. |
|
3 |
ICM-LEDG4SR |
10-30 Volt DC,
G4 LED bulb,
2.4 watts,
120 lumens,
Red LEDS,
Side entry pins |
RED LED's |
MSRP: $34.95 |
Now $24.95
|
|
|
|
shipping &
tax info,
Weight .02 lbs. |
|
| |
|
LED Bulbs - comparison
page |
| |
| |
|
