LED Power Conditioners - SailorSams.com

The InterVOLT SPCi Mini Series LED Power Conditioners are a converter, stabilizer, isolator and regulator all built into a single innovative compact package. Order below

These units feature galvanic isolation with no common connectivity between the input and the output whatsoever.

This means peace-of-mind when connecting sensitive and often expensive, high-end electronic equipment or non-voltage regulated LED fixtures to the output.

Housed in InterVOLT's new Mini Series enclosure which is not only stylish but compact, efficient and installer friendly.

These units are highly recommended to be used with any non-regulated LED product such as LED rope light.

Dimensions:
6.69 x 3.15 x 1.58 in.
(170 x 80 x 40mm)

Downloads:

Product Sheet from manufacturer for full details (pdf file).

Installation Instructions from manufacturer (pdf file).

Product Details: 12 volt model

Dimensions (L x W x H): 6.69 x 3.15 x 1.58 in. (170 x 80 x 40mm)
Input Voltage Range: 10-16VDC
Output Voltage - Low Setting: 12.5VDC nominal
Output Voltage - High Setting: 13.6VDC nominal
Standby Current Draw: <20mA
Continuous Load Rating @30°C (80°F): 7 Amps @13.6VDC
Peak Load @30°C (80°F): 10 Amps @13.6VDC
Operating Temperature: -25°C to +45°C
Housing: Marine grade aluminum dye anodized with ABS molded end caps
Weight: 0.922 lbs.

Product Details: 24 volt model

Dimensions (L x W x H): 6.69 x 3.15 x 1.58 in. (170 x 80 x 40mm)
Input Voltage Range: 17-33VDC
Output Voltage - Low Setting: 25.0VDC nominal
Output Voltage - High Setting: 27.2VDC nominal
Standby Current Draw: <20mA
Continuous Load Rating @30°C (80°F): 5 Amps @27.2VDC
Peak Load @30°C(80°F): 7 Amps @27.2VDC
Operating Temperature: -25°C to +45°C
Housing: Marine grade aluminum dye anodized with ABS molded end caps
Weight: 0.922 lbs.