12 volt / 24 volt Recessed LED Ceiling Lights: FriLight Comet svc-8710sL series.
Swivel Ceiling LED Light with switch, Surface mount, 12-24 volt (accepts 10-30vdc)
- Dimmable LED Light*

FriLight Comet Ceiling LED Light
svc-8710sL series (with switch)

Plastic FriLight light fixture with
fused Bee Green LED^TM.

Order below

Adjustable / Swivel Surface Mount

Plastic with frosted glass lens and switch.

Includes G4 style LED bulb.

* Optional: to dim this LED Light, you can use bd1206 LED Dimmer for dimming range of approximately 50-100%, or use the IMT-ILDIM-ROT10 dimmer for 0-100% dimming.

12 volt Swivel Ceiling LED Light with switch

Dimensions:
LED Fixture Dimensions

This fixture includes a fused Bee Green LED^TM bulb (select LED color below when ordering)

Bee Green LED, 1.18" diameter G4 LED Bulb Specifications:

For your safety, this LED bulb is fused

Bee Green LED^TM Bulbs are
certified CE and ROHS compliant.

LED Bulb id / Details
svc-Lg4s10ww Warm White LED:
10-30 Volts DC, 1.6 watts, 140 Lumens*
svc-Lg4s10cw Cool White LED:
10-30 Volts DC, 2.2 watts, 165 Lumens*
svc-Lg4s10bu Blue LED:
10-30 Volts DC, 1.6 watts
svc-Lg4s10rd Red LED:
10-30 Volts DC, 1.6 watts

LED Bulb Color Temperature:
• Warm White LED 3200k +/-10%
• Cool White LED 6500k +/- 10%
• Blue LED
• Red LED

* Compare to a 10W Xenon or Halogen bulb, which are typically 100 to 140 Lumens, depending on the bulb quality, the fixture, the lens, and the quality of the reflector, if any. Also, LED bulbs are more direct, whereas a G4 bulb emits light in all directions.

What is an LED Converter?

When using LED lights on DC power that is converted from AC Power (or when using AC-ready LED's), you may experience noise or fluctuations in intensity. This is typically caused by non-smooth power characteristics (such as sine wave remnants). This can usually be resolved with an LED Converter. An LED converter not only converts AC to DC, it also smoothes out the wave (provides superior voltage regulation), so your LED's get what they need in a regulated dosage.

In other words, some LED's can be used on AC power (check the specifications). Others can be used only on DC power. The bottom line is, in either case, if your power source is AC (or was converted from AC instead being sourced from a battery or solar cell), an LED Converter can be used to eliminate noise or fluctuations in intensity.