|
|
| |
| 12 Volt Lights et al > Switches
> ILDIM and ILVPC Dimmers |
| |
IML Rotary 12 volt DC
Dimmers and 24 volt DC Dimmers:
ILDIM (6-32 volt input/12 or 24
volt output) and ILVPC (12 or 24 volt input) Dimmers
0 - 10 Amp, 20 Amp, and 30 Amp DC Dimmers
|
|
The IML Dimmers are energy-efficient, easy to install rheostat style
dimmers, and are available in a range of power options. For
use with all filament lamps (incandescent, halogen,
xenon) and suitable for most low power LED fixtures
(will not work with high flux LEDs with current
regulated drivers). They operate on all 12VDC and
24VDC systems. They incorporate a full positive "off"
position eliminating the need for a separate on/off
switch.
ILDIM Rotary Dimmers are
the smallest model and will handle loads from 0
through 10 amps. These
accept a wide input voltage range: from a
6 volt DC to a 32 volt
DC input, and provide a 12 or 24 volt DC output. These are
ideal for dimming lights on a 6 volt DC circuit, a 12 volt DC circuit, a 24
volt DC circuit or a 32 Volt DC circuit. Note that the
bulbs in the fixtures you are dimming should have
voltage ratings relative to the output you choose (12
volt or 24 volt).
ILVPC Variable Power Dimmers
For higher capacity circuits, we offer a 20 amp and 30
amp model. These are primarily designed
for use as 12 OR 24 VOLT DC light dimmers in marine
applications. They can also be used as motor speed
controllers for small DC fans and other small DC
motors.
Optional blanking modules, face plates, mounting
boxes, switches and receptacles available separately:
refer to IML
Top Switching System
Order below
Specifications and Sizes |
|
|

IMT-ILDIM-ROT10
12 Volt Dimmer
24 Volt Dimmer
32 Volt Dimmer |

Dimmer is
shown mounted on an optional "IML Top 2-gang Blanking
Module" with an optional IML Top Switch Plate |
|
Order below |
|
Optional blanking
modules, face plates, mounting boxes, switches and
receptacles available separately: refer to
IML Top Switching System |
|
ILDIM Dimmers:
0-10 Amp Power-Saving Light Dimmer with full on/off.
6-32VDC Input, 12V or 24V
Output. Smooth
rheostat operation. Black Rotary Dial included. Completely
potted electronics. Versatile mounting through wide range of
wall thickness.
Dimming: 0-100%
Wide Input Range: 6-32VDC
Power Saving Feature
Full On/Off
Electrical Protection: Short Circuit
EMI Shielding |
|

IMT-ILVPC-20 |

12 Volt
Dimmer is shown mounted on an optional "IML Top 2-gang
Blanking Module" with an optional IML Top Switch Plate |
|
Order below |
|
Optional blanking
modules, face plates, mounting boxes, switches and
receptacles available separately: refer to
IML Top Switching System |
|
ILVPC-20 Dimmers:
The ILVPC-20 Dimmers have
10" wire leads connecting the remote potentiometer.
ILVPC-20 Dimmer:
12 volts DC / 20 amps (240
watts) or 24 volts DC / 20 amps (480 watts).
Specifications and Sizes |
|

IMT-ILVPC-30 |

12 Volt
Dimmer is shown mounted on an optional "IML Top 2-gang
Blanking Module" with an optional IML Top Switch Plate |
|
Order below |
|
Optional blanking modules, face plates, mounting boxes,
switches and receptacles available separately: refer to
IML Top Switching
System |
|
ILVPC-30 Dimmers:
The ILVPC-30 Dimmer has 10"
wire leads connecting the remote potentiometer.
ILVPC-30 Dimmer:
12 volts DC
/ 30 amps (360 watts) or 24 volts DC / 30 amps (720
watts).
Specifications and Sizes |
|

Wiring Details and Installation Information for the ILVPC
Dimmers (pdf document):
Specifications and Sizes
(details below - max surge, continuous amps, dimensions,
wire sizes, operating voltage, operating temperature |
|
Rotary
Dimmers are available in a range of power options from 2 to
30 amps. Each dimmer is equipped with its own control
knob. Units have 10” wire leads connecting the remote
rheostat knob. DC only.
Supplied with
knob (photo above shows knob for ILVPC models. Alternative
control knobs are available for ILVPC models. |
|
|
Specifications |
|
Model Number >> |
IMT-ILDIM-ROT10 |
IMT-ILVPC-10 |
IMT-ILVPC-20 |
IMT-ILVPC-30 |
| Max.
Continuous Amps |
|
10 Amps |
20 Amps |
30 Amps |
|
Max. Surge
Amps (5 Sec) |
|
40 Amps |
100 Amps |
120 Amps |
|
Max. Surge
Amps (.01 Sec) |
|
80 Amps |
200 Amps |
240 Amps |
|
Nominal
Unit
Size: |
L |
2-1/2" |
2 1/4" |
2 1/4" |
2 1/4" |
|
W |
1-1/2" |
2 1/2" |
2 1/2" |
2 1/2" |
|
H |
2-1/8" |
2 1/4" |
2 1/4" |
5 1/4" |
|
Nominal
Wire Size |
Black |
|
#16 |
#16 |
#16 |
| Red
|
|
#16 |
#14 |
#12 |
| Blue |
|
#16 |
#14 |
#12 |
| Lead
Lengths (Nom.) |
|
10" |
10" |
10" |
|
| |
|