Boat Dock Ladders from SailorSams.com
Straight Dock Ladders, Lifting Dock Ladders, Swing Dock Ladders

STRAIGHT DOCK LADDERS:

• Standard step width: 2" deep
• Wide step option available as specified (4" deep)
• Constructed from marine grade aluminum 1 1/4" I.D. pipe made from marine grade aluminum 6063 T-5 to resist corrosion
• Extruded aluminum channels are serrated to produce a non-skid surface rung with no sharp edges
• Use as either a dock ladder or seawall ladder
• Standard dock ladder sizes are: 3, 5, & 7 step models
• Rated for 665 lbs. per rung (see our engineer's report (pdf file)
• Straight Dock Ladder & Swing Dock Ladder Assembly / Installation (pdf file)

Straight Dock Ladders: order below

Straight Dock Ladders

Dimensional Diagram:
5 Step Straight Dock Ladder (pdf file)

LIFTING DOCK LADDERS: The Original Lifting Ladder

• Standard step width: 2" deep
• Rungs slide up and down allowing bottom rungs to be kept out of the water
• Distance from dock to bottom rung
  - 5 rung model: 2' retracted, 5' extended
  - 7 rung model: 2' retracted - 7' extended
• Constructed from 1 1/4" I.D. pipe made from marine grade aluminum 6063 T-5 to resist corrosion
• All welded construction for strength
• Standard ladder sizes are: 5 & 7 step models
• New option - Lifting Ladder for Floating Dock now available - it stores upright completely out of the water on most docks (the overhang is minimal at approximately 13" instead of the approximately 26" overhang on the standard lifting dock ladders).
• New double rung locking mechanism results in the sturdiest lifting ladder in the industry
• Extruded aluminum channels are serrated to produce a non-skid surface rung with no sharp edges
• Rated for 665 lbs. per rung (see our engineer's report PDF File)
• Lifting Dock Ladder Assembly / Installation (pdf file)

Lifting Dock Ladders: order below

Lifting Dock Ladders

Dimensional Diagram:
5 Step Lifting Dock Ladder (pdf file)

• Standard step width: 2" deep
• Wide step option available as specified (4" deep)
• Swings up and back allowing the entire ladder to be kept out of the water
• Constructed from 1 1/4" I.D. pipe made from marine grade aluminum 6063 T-5 to resist corrosion
• All welded construction for strength
• Extruded aluminum channels are serrated to produce a non-skid surface rung with no sharp edges
• Use as either a dock or seawall ladder
• Standard ladder sizes are: 3, 4, & 5 step models
• New locking pin mechanism locks ladder in either up or down positions
• Rated for 665 lbs. per rung (see our engineer's report PDF File)
• Straight Dock Ladder & Swing Dock Ladder Assembly / Installation (pdf file)

Swing Ladders

Dimensional Diagram:
4 Step Swing Dock Ladder (pdf file)

Wide Step Dock Ladders: 4" deep steps optional on Straight Ladders and Swing Ladders

OPTIONAL Dock Ladder QUICK RELEASE KIT:

The Quick Release Kit that International Dock Products offers marinas, boatyards and individual docks allows personnel to remove the ladder off the dock effortlessly and without tools for storage when not in use.

The kit comes with two aluminum bars that are bolted to the dock. Each bar corresponds with the left or right mounting bracket on the ladder.

Once the bars are installed on the dock, the ladder can be placed over the spikes in the bar and are then secured with a locking pin. For docks in colder regions, this is a handy option, especially if you want to take the ladders off the dock at wintertime when the water freezes over. And obviously, this is a great kit for those areas ravaged by hurricanes and tornadoes. DOCK LADDER QUICK RELEASE KIT INSTRUCTIONS (PDF File). 

Dock Ladder Quick Kit Release: order below

Order Here:       Questions? SailorSams Toll Free # 877-230-7353 - Hours