12 Volt Lights - 12 Volt LED Lights - 12 Volt LED Bulbs - 12 Volt LED Dimmers - 12 Volt LED Rope Lights - 12 Volt Refrigerator/Marine Refrigerators

SailorSams.com
Credit Card Processing

Office Hours: Mon - Fri 9 am-6 pm Eastern Time

Toll Free in Continental USA 877-230-7353
International Phone USA 941-378-0330
Fax USA 941-378-0550
eMail: info@sailorsams.com

HOME ---------- Security | About SailorSams | Shipping | > Shopping Cart >

 

 
LED Lights > LED Engine Room Lights
 

12 Volt DC - 24 Volt DC Engine Room LED Lights /
(actual operating voltages:
11.5-32 Volts DC)

ERL-4 Low-Voltage LED Engine Room Lights: A low profile LED utility light. Ideal for illumination of engine rooms, battery compartments, genset spaces, transom garages, etc. Surface Mount.

Order below

LED Engine Room Lights

Dimensions:
Engine Room LED Light Dimensions

Installation Instructions     Product Sheet from manufacturer

 

Low-Voltage LED Engine Room Lights - Features and Benefits

  • Solid state circuitry: Vibration and shock proof
  • High output wide-angle LED cluster
  • Low-profile design
  • Tough ABS housing
  • Vandal-proof polycarbonate clear diffuser
  • Silicone-insulated wires
  • Stainless steel fixing screws
  • Voltage-regulated 11.5-32 VDC operation

 

 

 

 

Low-Voltage LED Engine Room Lights -Product Details
  • Base material: White ABS
  • Lens Material: Clear polycarbonate diffuser
  • Base Dimensions: 9.8" x 4.7" (25cm x 12cm)
  • Fixture Height: 2.4" (6cm)
  • Voltage: 11.5-32VDC
  • Power Consumption: 4.8W
  • LED Engine: 78 x 5mm high output wide-angle LEDs
  • Beam Angle: 120°
  • Kelvin Temp: 6500K
  • Average Life: 50,000 hrs
  • Integral Switch: No
  • Mounting Method: Surface mount with fixing screws
  • Ingress Protection: IP56
  • Classifications: F-Rated, Class III
  • Manufacturer: Imtra
  • Weight: 0.688 lbs.

Note: These Engine Room Lights are not dimmable.

What is an LED Converter?

When using LED lights on DC power that is converted from AC Power, you may experience noise or fluctuations in intensity. This is typically caused by non-smooth power characteristics (such as sine wave influence). This can usually be resolved with an LED Converter. An LED converter not only converts AC to DC, it also smoothes out the wave (provides superior voltage regulation), so your LED's get what they need in a regulated dosage.

The bottom line is, if your power source is noisy (such as if it was converted from AC instead of being sourced from a battery or solar cell), you may find an LED Converter is the best solution (not all transformers / power supplies are of the same caliber). LED converters are designed specifically to power LED's.

 

Order Here:       Questions? eMail: info@sailorsams.com
SailorSams Toll Free in Continental USA # 877-230-7353

International Telephone # 941-378-0330

Line # Part # Description Voltage LED Color Finish Water Tolerance Regular Price

Current Price

Order
1

IMT-ILER-LEDC-DC

As of February 11, 2010, this item has been discontinued.

Alternatives:
LED Utility  Lights

ERL-4, LED Engine Room Light 11.5-32VDC

Cool White LEDs

White

high -
IP56
 

Alternatives:
LED Utility  Lights

 

Ingress Protection / IP Rating:

 

IP 20 Protected against solids larger than 12 mm; not protected against liquids.

IP 40 Protected against solids larger than 1 mm; not protected against liquids.

IP 55 Protected against dust and protected against jets of water from all directions.

IP 65 Completely protected against dust and protected against jets of water from all directions, i.e. waterproof.

 
LED Navigation Lights - Dock Cushions - Dock Ladders - Electric Cooktops - Marine Hardware - Boat Shrink Wrap - Shrink Wrap - Pallet Shrink Bags

Boating products and more, from around the country and around the world.