|
|
| |
| 12 Volt Lights et al > Switches >
ICM-4860 Rocker Switches - Euro Style |
| |
ICM-4860
Series Switches: 12 Volt Rocker Switches, 24 Volt Rocker Switches,
120 Volt AC Switches, 230 Volt AC Switches
from
SailorSams.com
|
|
Euro
Switch ICM-4860, Recessed Mount:
Single Switches and Dual Switches -
Order below |
|
2.36" x 2.36" |
2.36" x 2.36" each |
2.36" x 2.36" |
| |
|
Euro
Switch 4860 Series: Single Rocker Switch -
Dual Rocker Switches
Each
switch can be used at 12 volts, 24 volts 120 volts and
230 volts; and have the following ratings at the
various voltages:
12 volts - 100
watts - 8.3 amps,
24 volts - 200
watts - 8.3 amps,
120 Volt
AC - 1000 watts - 8.3 amps,
230 Volt AC - 2000 watts
- 8.3 amps
(per
rocker switch - each rocker switch is independent)
See Dimensional Drawing
and Mounting Suggestions below |
|
|
|
|
|
Single Switches |
Line
# |
Part Number |
Description |
Price |
Order |
|
1 |
ICM-4860-1-WH
 |
Single Euro Rocker Switch
White with White bezel |
$10.00 |
|
 |
Line
# |
Part Number |
Description |
Price |
Order |
| 2 |
ICM-4860-1-CR |
Single
Euro Rocker Switch
Black with Chrome bezel
|
$12.75 |
|
|
Line
# |
Part Number |
Description |
Price |
Order |
|
3 |
ICM-4860-1-BR |
Single Euro Rocker Switch
White
with Brass colored bezel |
$12.75 |
|
|
|
Dual Switches |
Line
# |
Part Number |
Description |
Price |
Order |
| 4 |
ICM-4860-2-WH |
Dual Euro
Rocker Switches
White with White bezel
|
$11.50 |
|
|
Line
# |
Part Number |
Description |
Price |
Order |
|
5 |
ICM-4860-2-CR |
Dual Euro Rocker Switches
Black with Chrome bezel |
$14.50 |
|
|
Line
# |
Part Number |
Description |
Price |
Order |
| 6 |
ICM-4860-2-BR |
Dual Euro
Rocker Switches
White
with Brass colored bezel |
$14.50 |
|
|
|
|
Dimensions
(same for 4860-1 and 4860-2) |
|
|
 |
 |
 |
Spade Lugs
are
0.2" wide
(5 mm) |
|
Entire
assembly included:
Switch (or switches) mounted on plate, housing and
bezel. |
Mounting Suggestions:
-
New installations:
first make a cutout for the 2.125" diameter housing
directly into your wall panel. Seat the housing into the
wall cutout and mark the wall for 4 pilot holes to match the
housing corner screw hole pattern. Remove the housing. Drill
the pilot holes in the wall. Wire the switch assembly to
your wiring in the wall. Seat the switch housing into the
wall cutout. Install 4 mounting screws to hold the housing
to the wall. Seat the switch assembly in the housing and
snap the bezel into place (this hides the mounting screws
and holds the switch assembly).
-
To
retrofit into an existing
switch housing, you may want to mount the switch onto a
blank wall plate that fits onto your existing switch housing
(similar procedure to the preceding paragraph).
Standard Blank Wall plates
are available in various colors from hardware stores and
electrical suppliers. Standard wall plates fit standard
residential style electrical switch boxes.
Matching
Dimmer Switches Available: The Euro Switches (4860 series)
and the Dimmer Switches (D1201 AND D1224 series) have the
same faceplate outside dimensions of 2.36" x 2.36".
D1224 Series
Digital
12 Volt Dimmer Switch
D1201 Series Rotary Style
12 Volt Dimmer |
|
| |
| |
|
