|
"Reader" LED Replacement Bulbs: Warm White, 10-30VDC, 1.5 Watt, Directional, Ba15s Socket.
For replacing (level side pin) BA15s
(single filament #1156) Single Base Contact Bayonet bulbs
in chart lights and reading lights.
Fixtures using the single-contact #1156 BA15s
lamps are frequently found in older boats and RV's.
Chart & reading lights in newer boats and RV's
typically use the double contact #1142 BA15d bulbs.
Reading lights in newer boats & RVs typically
use the double contact #1142
BA15d bulbs. For these, we sell the
ILBA1142-04W. |
72 Lumens, 1.5 watt, #1156 LED Bulb
Single contact on base
Note: a typical 1156 bulb
is
usually about 402 lumens and
consumes 26.9 watts of power
 |
|
Product Details:
Fits Socket: Ba15s (single contact)
Typical Applications:
chart reading, safety or stand-by lighting
Dimensions:
1.06" x 1.5"
27mm x 38mm
Input Voltage: 10-30VDC
Power (Watts): 1.5 Watts
Current Draw: 125mA/12V; 63mA/24V
LED Emitting Color: Warm White
LED Type/Quantity: 6 x SMD
Beam Angle (3 directions): 120º
Light Output (Lumens): 72 lumens
Warranty: 2 Years
Weight: 0.025 lbs.
Upgrade your fixtures today and enjoy no maintenance, super long
life, super low power consumption, and cooler operation. |
What is an LED Converter?
When using LED lights on DC power that is
converted from AC Power, you may
experience noise or fluctuations in intensity. This is typically caused by
non-smooth power characteristics (such as sine wave influence). This can usually be
resolved with an LED Converter. An LED converter not only converts AC to
DC, it also smoothes out the wave (provides superior voltage regulation),
so your LED's get what they need in a regulated dosage.
The bottom line is, if your power source is
noisy (such as if it
was converted from AC instead of being sourced from a battery or solar
cell), you may find an LED Converter is the best solution (not all
transformers / power supplies are of the same caliber).
LED converters are designed
specifically to power LED's.
|
