Imtra X-Beam G4 (Side-Entry) LED Light Bulbs, 2.2 watt
120 Warm White or 150 Lumen Cool White LED Bulb, 12v/24v (8-30 Volt DC)
from SailorSams.com

Replacement LED Bulb with light output comparable to a 10 watt halogen bulb. Order below

At 120-150 lumens, these are Imtra's brightest white G4 LED bulbs. (Warm White is 120 lumens; Cool White is 150 lumens)

Proprietary PWM Constant-current drive and high output thermally-efficient SMDs combine to give record setting output in a G4 form factor.

These LED bulbs work great in popular dome G4 socket light fixtures from Scandvik, Perko, ABI and others.

Choose warm white for interiors and cool white for exterior applications.

Note: Check alignment of existing socket pin holes in your fixture.

Convert your existing halogen or xenon fixture to an efficient and cool running LED fixture simply by changing the bulb. Upgrade your fixtures today and enjoy no maintenance, super long life, super low power consumption, and cooler operation.

LED Bulb Features & Benefits:
High output SMD LEDs
Constant-current drive topology
Over-voltage protection
No radiated heat
Thermally efficient design

LED Bulb Product Sheet (pdf)

Replace this G4 style bulb with an efficient/energy saving LED Bulb.

G4 Style Bulb

G4 LED bulbs
Replacement LED Bulb
120 Lumens
(warm white); or
150 Lumens
(cool white)

Looking for a back mount LED Bulb? Imtra X-Beam G4 LED (Back-Entry)

LED Bulb Product Details

Fits Socket: G4
Typical Application: Ceiling Fixtures and Spotlights
Dimensions: 1.24" diameter (31.5mm)
Input Voltage: 8-30VDC
Power (Watts): 2.2W
Current Draw:
- 180mA/12V
- 90mA/24V
LED Type/Quantity: 10 x SMD
Beam Angle (FWHM): 120º
Light Output (Lumens):
- Warm White: 120 lms
- Cool White: 150 lms
Warranty: 2 Years

What is an LED Converter?

When using LED lights on DC power that is converted from AC Power, you may experience noise or fluctuations in intensity. This is typically caused by non-smooth power characteristics (such as sine wave influence). This can usually be resolved with an LED Converter. An LED converter not only converts AC to DC, it also smoothes out the wave (provides superior voltage regulation), so your LED's get what they need in a regulated dosage.

The bottom line is, if your power source is noisy (such as if it was converted from AC instead of being sourced from a battery or solar cell), you may find an LED Converter is the best solution (not all transformers / power supplies are of the same caliber). LED converters are designed specifically to power LED's.