|
ICM-D1205 LED
Dimmer is a
3 Wire, Rotary LED Dimmer designed to work with ICM brand 1 Watt
LED Lights.
For use
on 12 or 24 Volt DC Systems. The voltage output is
12 volts in either case, and they are
compatible
with the specific 12 Volt LED's Lights listed below. |
|
|
IML PowerLED Dimmer
is a PWM
(Pulse Width Modulation) dimmer that works with IML
PowerLED's from 2.6 to 5.5 watts.
This electronic dimmer is
designed to
work specifically with IML PowerLED spotlights - see list below
(cannot be used with
Newport PowerLED Bi-Color spots). |
|
|
ICM-D1205
Led Dimmer
2.36" square bezel (outside
dimensions)
Product Details:
Voltage Input: 12 Volts DC or 24 Volts DC
Output Voltage: 12 Volts DC
Capacity/Max Load: 10 Watts (7 watts
recommended maximum). Compatible lights are all 1 Watt each, for
a maximum recommended total of 7 LED lights.
This dimmer will drive up to 7
of the below listed fixtures
from a single location, rotary dimmer with integral On-Off
switch.
* Compatible with the following specific
ICM LED Lights (1
Watt each):
Nova LED Lights (1 watt)
Pinto LED Light (1 watt)
Eyelight
LED Light (1 watt)
Tube 9006 LED Reading Light with switch (1 watt)
|
Product Details:
Voltage Input: 12/24VDC or 24VAC
Power Input: 0.6W max
Capacity: 15 PowerLED fixtures
No. of Controls: Unlimited (wired in parallel)
Control Type: Momentary, single pole/single throw
This dimmer will drive up
to 15 of the below-listed fixtures and supports an unlimited number
of momentary controls.
* Compatible with the following specific
Imtra LED Lights (2.6 to 5.5 Watts each):
Hatteras Power LED Spotlights
(3 watt)
Portland Power LED Recessed Spotlights
(2.6 watt)
Newport Power LED Spotlights
(5.5 watt)
Norfolk Power LED Recessed Spotlights
(2.6 watt)
Imtra Momentary
Switches and Boxes |
