|
|
| |
| LED Lights > LED
Ceiling Lights |
| |
Newport
Power LED - Boat Ceiling Spot Lights / Dimmable LED Light
12 volt
LED or 24 volt LED
(10-30 Volt AC or DC)
|
Comparable
to 20W halogen spotlights,
the NEWPORT PowerLED consumes only a fraction of the energy
- only 5.5 watts.
Available with Warm White LEDs, Cool White LED's, Red LED's
or Blue LED's.
 
Order
below
  |
Newport Power LED
Dimensions:

|
Newport Power LED Details /
Spring-load mounted fixture
 |

|
|
|
|
Dimmable PowerLED Light Fixtures
using
Imtra's power-saving
PWM momentary
digital dimmer:
Norfolk Power LED
Spotlight
(2.6 watt, DC voltage only, 2.71" diameter)
Hatteras Power LED Spotlights
(3 watt, DC voltage only, 2.85" diameter)
Ventura Power LED Spotlights
(5.5 watt, DC voltage only, 3.18" diameter)
Portland Power LED Spotlights
(3 watt, DC voltage only, 3.43" diameter)
Portland
Bi-Color Power LED Spotlights
(3 watt, DC voltage only, 3.43" diameter)
Avalon 105 Power
LED Light Fixture
(5.5 watt, DC voltage only, 4.13" diameter)
Avalon 155 Power LED
Light Fixture
(5.5 watt, DC voltage only, 6.1" diameter)
Tacoma 155 Power
LED Light Fixture (5.5 watt, DC voltage only, 6.1" diameter) |
|
|
|
Combining Luxeon LEDs with proprietary high
performance drive electronics and high efficiency optics,
Imtra introduces a high output LSA (LED Spotlight
Assembly) specifically designed to satisfy the demands of
the marine market. Performance is comparable to today's
typical 20W halogen spots but with a fraction of the
energy consumption (5.5W) and with no radiated heat! The
Newport PowerLED will operate off 10-30VDC (or 10-30VAC
from magnetic transformer/do not use with electronic
transformer). It will not interfere with any on-board
electronics. It contains a PWM dimmer interface allowing
full dimming ability with no change in color temperature.
Light color
choices include *warm white,
cool white, red, and cyan. Trim rings available in several
finishes.
*
WARM WHITE LED's
produce a softer light output, whereas the COOL WHITE
LED's are more of a pure white light (which can actually
look bluish and is sometimes considered harsh, as with
fluorescent lights). Depending on your application, most
people prefer WARM white LED's (best for most
applications).
A built-in dimmer interface allows for
effortless touch-control dimming
of up to 15 PowerLED's using the
Imtra IML
PowerLED PWM Dimmer.
Features
and Benefits:
- Power Consumption: 5.5 watts
- 10 to 30 VDC or VAC (if using
transformer, use magnetic transformer only/do not use with
electronic transformer)
- Light Output comparable to 20W Halogen Bulb
- Sealed unit for resistance to salt air & humidity
- PWM (Pulse Width Modulation) interface for full range of
dimming
- Color temperature remains consistent thru full dimming
and voltage range
- No IR or UV emissions
- Power factor correction - compatibility with generator
- Spikes/transient protection
- Shock & vibration resistant
- EMI Filtering
- Designed to meet UL1149
Download
Product Sheet from manufacturer for full details (pdf
file) - includes photometric data
(Luminance data provided).
|
Product Details
Lens Material: Opaque acrylic
Trim Ring Diameter: 3.18" (80.8mm)
Cut-Out Diameter: 2.7" (68.5mm)
Recessed Depth: 1.36" (34.5mm)
Voltage: 10-30VDC or VAC
(magnetic transformer only)
Power Consumption: 5W
LED Engine: 3 x 1W High Flux LEDs with integrated LED
driver - Warm White
Beam Angle: 40°
Kelvin Temp: Warm White 3300K, Cool White 5500K
CRI: 76
Electrical Protections: Spikes (up to 200V)/Transient
protection
Integral Switch: No
Dimmer Module: See IMT-ILIM80100
(for use with DC
Voltage only)
Mounting Method: Spring mounted
Classifications: Class III, F-Rated, ROHS
Manufacturer: Imtra
|
|
|
|
PowerLED Wiring:
Red Wire,
Black Wire:
Power Inputs (Either wire may accept positive or negative
polarity).
White Wire: Dimming Input Signal.
Gray
Wire: Dimming Return. Connect the Dim-Return (gray
wire) of the dimmer to the Dim-Return (gray wire) of the
IML PowerLED.
PowerLED Installation Instructions (pdf) |
|
|
|
|
|
|
|
13 |
Part # |
Description |
Finish |
LED's |
Power Consumption |
Halogen Equivalent |
Water Tolerance |
Regular Price |
Current Price |
replaced by the
Ventura Power LED |
|
IMT-ILIM30800 |
Newport
PowerLED |
White |
3 x 1 Watt
CYAN LED's |
5.5 watts
(0.5 amps at 12 volts / 0.25 amps at 24 volts) |
20 watts |
high -
IP65 |
|
|
|
Dimmer available -
see below |
|
14 |
Part # |
Description |
Finish |
LED's |
Power Consumption |
Halogen Equivalent |
Water Tolerance |
Regular Price |
Current Price |
replaced by the
Ventura Power LED |
|
IMT-ILIM30801 |
Newport
PowerLED |
Polished
SS |
3 x 1 Watt
CYAN LED's |
5.5 watts
(0.5 amps at 12 volts / 0.25 amps at 24 volts) |
20 watts |
high -
IP65 |
|
|
|
Dimmer available -
see below |
|
15 |
Part # |
Description |
Finish |
LED's |
Power Consumption |
Halogen Equivalent |
Water Tolerance |
Regular Price |
Current Price |
replaced by the
Ventura Power LED |
|
IMT-ILIM30803 |
Newport
PowerLED |
Satin
Nickel |
3 x 1 Watt
CYAN LED's |
5.5 watts
(0.5 amps at 12 volts / 0.25 amps at 24 volts) |
20 watts |
IP40 |
|
|
|
Dimmer available -
see below |
|
16 |
Part # |
Description |
Finish |
LED's |
Power Consumption |
Halogen Equivalent |
Water Tolerance |
Regular Price |
Current Price |
replaced by the
Ventura Power LED |
|
IMT-ILIM30805 |
Newport
PowerLED |
Gold |
3 x 1 Watt
CYAN LED's |
5.5 watts
(0.5 amps at 12 volts / 0.25 amps at 24 volts) |
20 watts |
IP40 |
|
|
|
Dimmer available -
see below |
|
1 |
Part # |
Description |
Finish |
LED's |
Power Consumption |
Halogen Equivalent |
Water Tolerance |
Regular Price |
Current Price |
|
IMT-ILIM30500
 |
Newport
PowerLED |
White |
3 x 1 Watt
WARM* white LED's |
5.5 watts
(0.5 amps at 12 volts / 0.25 amps at 24 volts) |
20 watts |
high -
IP65 |
|
|
|
Dimmer available -
see below |
|
2 |
Part # |
Description |
Finish |
LED's |
Power Consumption |
Halogen Equivalent |
Water Tolerance |
Regular Price |
Current Price |
|
|
IMT-ILIM30501 |
Newport
PowerLED |
Polished
SS |
3 x 1 Watt
WARM* white LED's |
5.5 watts
(0.5 amps at 12 volts / 0.25 amps at 24 volts) |
20 watts |
high -
IP65 |
|
|
|
Dimmer available -
see below |
|
3 |
Part # |
Description |
Finish |
LED's |
Power Consumption |
Halogen Equivalent |
Water Tolerance |
Regular Price |
Current Price |
|
|
IMT-ILIM30503 |
Newport
PowerLED |
Satin
Nickel |
3 x 1 Watt
WARM* white LED's |
5.5 watts
(0.5 amps at 12 volts / 0.25 amps at 24 volts) |
20 watts |
IP40 |
|
|
|
Dimmer available -
see below |
|
4 |
Part # |
Description |
Finish |
LED's |
Power Consumption |
Halogen Equivalent |
Water Tolerance |
Regular Price |
Current Price |
replaced by the
Ventura Power LED |
|
IMT-ILIM30505 |
Newport
PowerLED |
Gold |
3 x 1 Watt
WARM* white LED's |
5.5 watts
(0.5 amps at 12 volts / 0.25 amps at 24 volts) |
20 watts |
IP40 |
|
|
|
Dimmer available -
see below |
|
5 |
Part # |
Description |
Finish |
LED's |
Power Consumption |
Halogen Equivalent |
Water Tolerance |
Regular Price |
Current Price |
replaced by the
Ventura Power LED |
|
IMT-ILIM30600 |
Newport
PowerLED |
White |
3 x 1 Watt
COLD* white LED's |
5.5 watts
(0.5 amps at 12 volts / 0.25 amps at 24 volts) |
20 watts |
high -
IP65 |
|
|
|
Dimmer available -
see below |
|
6 |
Part # |
Description |
Finish |
LED's |
Power Consumption |
Halogen Equivalent |
Water Tolerance |
Regular Price |
Current Price |
replaced by the
Ventura Power LED |
|
IMT-ILIM30601 |
Newport
PowerLED |
Polished
SS |
3 x 1 Watt
COLD*
white LED's |
5.5 watts
(0.5 amps at 12 volts / 0.25 amps at 24 volts) |
20 watts |
high -
IP65 |
|
|
|
Dimmer available -
see below |
|
7 |
Part # |
Description |
Finish |
LED's |
Power Consumption |
Halogen Equivalent |
Water Tolerance |
Regular Price |
Current Price |
replaced by the
Ventura Power LED |
|
IMT-ILIM30603 |
Newport
PowerLED |
Satin
Nickel |
3 x 1 Watt
COLD*
white LED's |
5.5 watts
(0.5 amps at 12 volts / 0.25 amps at 24 volts) |
20 watts |
IP40 |
|
|
|
Dimmer available -
see below |
|
8 |
Part # |
Description |
Finish |
LED's |
Power Consumption |
Halogen Equivalent |
Water Tolerance |
Regular Price |
Current Price |
replaced by the
Ventura Power LED |
|
IMT-ILIM30605 |
Newport
PowerLED |
Gold |
3 x 1 Watt
COLD*
white LED's |
5.5 watts
(0.5 amps at 12 volts / 0.25 amps at 24 volts) |
20 watts |
IP40 |
|
|
|
Dimmer available -
see below |
|
9 |
Part # |
Description |
Finish |
LED's |
Power Consumption |
Halogen Equivalent |
Water Tolerance |
Regular Price |
Current Price |
Discontinued |
|
IMT-ILIM30700 |
Newport
PowerLED |
White |
3 x 1 Watt
RED LED's |
5.5 watts
(0.5 amps at 12 volts / 0.25 amps at 24 volts) |
20 watts |
high -
IP65 |
|
|
|
Dimmer available -
see below |
|
10 |
Part # |
Description |
Finish |
LED's |
Power Consumption |
Halogen Equivalent |
Water Tolerance |
Regular Price |
Current Price |
Discontinued |
|
IMT-ILIM30701 |
Newport
PowerLED |
Polished
SS |
3 x 1 Watt
RED LED's |
5.5 watts
(0.5 amps at 12 volts / 0.25 amps at 24 volts) |
20 watts |
high -
IP65 |
|
|
|
Dimmer available -
see below |
|
11 |
Part # |
Description |
Finish |
LED's |
Power Consumption |
Halogen Equivalent |
Water Tolerance |
Regular Price |
Current Price |
Discontinued |
|
IMT-ILIM30703 |
Newport
PowerLED |
Satin
Nickel |
3 x 1 Watt
RED LED's |
5.5 watts
(0.5 amps at 12 volts / 0.25 amps at 24 volts) |
20 watts |
IP40 |
|
|
|
Dimmer available -
see below |
|
12 |
Part # |
Description |
Finish |
LED's |
Power Consumption |
Halogen Equivalent |
Water Tolerance |
Regular Price |
Current Price |
Discontinued |
|
IMT-ILIM30705 |
Newport
PowerLED |
Gold |
3 x 1 Watt
RED LED's |
5.5 watts
(0.5 amps at 12 volts / 0.25 amps at 24 volts) |
20 watts |
IP40 |
|
|
|
Dimmer available -
see below |
|
Accessories: |
|
17 |
Part # |
Description |
LED's |
Water Tolerance |
Regular Price |
Current Price |
|
|
Optional
Imtra IML
PowerLED PWM Dimmer |
|
|
|
|
|
Wiring Diagram using Newport
Dimmer and Newport Power LED Lights
Dimmer Dimensions:
 |
| |
|
Ingress Protection / IP Rating:
|
|
|
IP 20 Protected
against solids larger than 12 mm;
not protected against liquids.
IP 40
Protected against solids larger than 1 mm;
not protected against liquids.
IP 55 Protected against dust and
protected
against jets of water from all directions.
IP 65 Completely protected against
dust and protected
against jets of water from all directions, i.e. waterproof.
|
|
|
|
|
Alternative
Power LED Light Fixtures:
Hatteras Power LED Spotlights
(3 watt, DC voltage only)
Portland Power LED Recessed Spotlights
(2.6 watt, DC voltage only)
Norfolk Power LED Recessed Spotlights
(2.6 watt, DC voltage only)
Led Lights
|
| |
|