|
|
|
|
|
PRODUCT
CATEGORIES: |
| |
|
Links
© 2003-2010 |
| |
| |
| Boating Safety
Equipment / Products |
| |
Signal
Mate provides better Boating Safety with Maneuvering/Position/Distress
Signals
- Manual or
Automated Navigational Maneuvering, Position and Distress Signals,
controlled by a
Flush Mount, Console Mount or Portable Signal Mate
|
|
Be Safe! Be Seen and Heard!
Prevent Collisions!
|
|
Make your vessel's
presence known with sound & light signaling with Signal Mate.
Be located
quickly in
case of emergencies!
Signal Mate can be used on every vessel from recreational
boats to mega yachts and ships.
Order below
Signal Mate, a Boat Navigation/Position Signal
Controller, automates Safety and Distress Signals to help keep you
secure.
Signal Mate
helps you
easily comply with mandatory Coast
Guard "Rules of the Road", including sound & light signals.
Signal Mate
controls the signals for you, so you are free to focus where you need to.
Signal Mate
allows you to
easily transmit proper signals and communicate your situation or
intentions with ease in day, night, or bad weather.
Use Signal Mate in
restricted visibility conditions such as fog, rain, snow; and
when fishing, when towing or being towed.
Signal Mate
can be used to control the transmitting of distress signals, to
control the transmitting of maneuvering signals, to control the
transmitting of warning signals.
Signal Mate
can be used for Manual Signals or for
Automatic Signals including Distress Signaling (Sound
& Light Signaling / Horn & Anchor Light Signaling).
Signal Mate
is a fully automatic, water resistant controller
producing all
sound and light signals required by the U.S. Coast Guard
Navigational Rules.
Easy installation.
Each unit
has wire ready terminal blocks (insert wires, tighten screws). Made in USA.
View image of
Signal Mate
Control Panel
Signal Mate
Dimensions (pdf) |
Console Mount Signal
Mate:
|
|
Flush Mount Signal Mate:
|
The Flush Mount Signal Mate or Console Mount Signal
Mate can be integrated with your existing horn and All-Round
light.
A
DIY kit lets you add a separate Horn and All-Round light. (DIY
Horn & Light sold
separately; DIY
Bracket sold separately.) |
 |
|
|
|
The Portable
Signal Mate model can easily be transported: |
|
 |
 |
|
|
Signal Mate Details: |
|
Signal Mate is specifically designed for boat safety in
conditions of restricted visibility and emergencies (USCG rule
35).
Signal Mate has push
buttons for easy selection of specific signals including restricted
visibility, danger/doubt and in need of assistance or distress (Inland &
International).
3 modes of operation: Manual, Automatic (preprogrammed) & latching.
Light and horn can be operated separately or synchronized together using
manual, automatic or latching modes (USCG rule 36).
The Signal Mate
(Flush Mount and Console Mount only)
controller is wired to a vessel's existing anchor light and horn or any
permanent / temporary light & or horn. See
Portable Signal Mate
below for
unique details about it.
Signal Mate Literature available for
download:
Signal Mate User Manual (pdf file)
Quick Guide to Sound & Light Signals (pdf file)
Signal Mate Brochure (pdf file)
Signal Mate Wiring Instructions (pdf file)
|
|
| |
|
Console Mount and Flush Mount Signal Mate Features
|
|
The Signal Mate Flush mount and Console
Mounted units are intended to be wired to a boats existing horn
and/or anchor light.
-
Synchronized or
Independent outputs capable @ 20 amps each.
-
Twist-lock 12V
adapter for automated emergency or spotlight signaling.
-
Output protected
power MOSFET'S, No Relays!
-
Solid State SMT
Technology.
-
Conformal coated
electronics.
-
Input Voltage 10 -
32 VDC.
-
Automatic mode,
(preprogrammed) hands free signaling during restricted visibility
or emergencies.
-
Manual mode,
operates horn, light or both using a push button.
-
Latching mode, turns
horn, light or both on or off (acts as an on/off switch).
-
Automatic light
senor for backlighting in hours of darkness.
-
Silicone rubber
splash-proof keypad.
-
Black powder-coated
aluminum enclosure.
-
Environmentally
tested -20 to +85 degrees Celsius.
-
Dimensions: 4" H x
2" W x 6.5" L
-
5 year warranty.
Video: Flush Mount Installation
(Flush Mount Unit)
|
|
|
Order below |
| |
|
|
|
|
Portable
Signal Mate Details |
| |
| The Portable unit is for portability on
any size boat, including a dingy. It is self contained and
can be deployed and be signaling in seconds. The unit is
pre-wired and ready for immediate use. Simply remove the
horn & LED light, connect the battery, insert the horn
into the bracket & position the light for maximum
visibility. Close the bag and start signaling your
intentions/situation. It only takes 30 seconds for
MAXIMUM SAFETY! The Signal Mate Portable
self-contained package contains the following:
- Signal Mate unit.
- Horn: 106db compact.
- LED light: 360° high intensity,
exceeding the USCG 3 mile requirement by 3 times and is
certified to
ABYC A-16 and 72 COLREGS standards.
- Battery: 7 ampere-hour AGM
- Charger: Three stage.
- Carrying
bag: All items stow in an orange bag.
|
|
|
|
|
|
 |
| |
|
Portable
Signal Mate Features |
| |
|
Synchronized or Independent
outputs (rule 36) capable @ 20 amps each.
Energy efficient high brightness, 3NM 360° LED light.
16 feet of cable for LED hoisting.
106db Electric horn with 8 feet of cable.
Twist-lock 12V adapter for automated emergency or
spotlight signaling.
Output protected power MOSFET'S, No Relays!
Solid State SMT Technology.
Conformal coated electronics.
Input Voltage 10 - 32 VDC.
Automatic mode, (preprogrammed) hands free
signaling during restricted visibility or emergencies.
Manual mode, operates horn, light or both using a
push button.
Latching mode, turns horn, light or both on or off
(acts as an on/off switch).
Automatic light senor for backlighting in hours of
darkness.
Silicone rubber splash-proof keypad.
Black powder-coated aluminum enclosure.
Sealed AGM battery - 12 volts, 7 amp hours (48 hours of
signaling in restricted visibility conditions).
3 Step smart charger 110Vac to 12Vdc.
Water resistant orange cordura stow bag.
Environmental tested -20 to +85 degrees Celsius.
Dimensions: 5"H x 7" W x 11" L
5 year warranty.
|
| |
|
Order below |
| |
|
|
Console Mount Signal Mate
|
Portable Signal Mate
Optional DIY Mounting Bracket
(to mount optional DIY Horn and Light)
|
|
Flush Mount Signal Mate
|
|
Large image
of Signal Mate
Control Panel
|
|
Customer support is paramount, for
questions
call the manufacturer direct:
Kimberlite / Signal Mate
410-675-4901,
7 am to 3:00 pm EST M-F |
|
|
|
|
|
|
|
|
Signal Mate Nautical Signaling Devices / Sound and Light
Controllers |
|
Line # |
Description |
Part Number |
Regular Price |
Current Price |
Order |
|
1A |
Signal Mate Flush Mount, Manual, Extra Fuses, Strain
Reliefs and Grommets (designed to use with your
anchor light and horn) |
SMK-SM-F |
MSRP:
$319.00 |
Now
$303.05 |
|
 |
Ship size: 12.25 x
9 x 7
inches,
weight 4 lbs |
|
1B |
Signal Mate Flush Mount DIY,
Manual, Extra Fuses, Strain Reliefs, Grommets,
Horn (with 1 foot of wire) and LED light
(with 2.5 feet of wire) |
SMK-SM-F-DIY |
MSRP:
$399.00 |
Now
$379.05 |
|
|
Ship size: 12.25 x
9 x 7
inches,
weight 5 lbs |
|
1C |
Signal Mate Flush Mount DIY,
Manual, Extra Fuses, Strain Reliefs, Grommets,
Horn (with 1 foot of wire) and LED light
(with 2.5 feet of wire),
PLUS optional DIY Mounting Bracket (for
horn and light) |
SMK-SM-F-DIY-BRD |
MSRP:
$414.00 |
Now
$393.30 |
|
|
Ship size: 12.25 x
9 x 7
inches,
weight 5 lbs |
|
2A |
Signal Mate Console Mount with Adjustable Mounting
Handle, Manual, Extra Fuses, Strain Reliefs and Grommets
(designed to use with your
anchor light and horn) |
SMK-SM-C |
MSRP:
$349.00 |
Now
$331.55 |
|
|
Ship size: 12.25 x
9 x 7
inches,
weight 4 lbs |
|
2B |
Signal Mate Console Mount DIY
with Adjustable Mounting Handle, Manual, Extra Fuses, Strain
Reliefs, Grommets, Horn (with 1 foot of
wire) and LED light (with 2.5 feet of wire) |
SMK-SM-C-DIY |
MSRP:
$419.00 |
Now
$398.05 |
|
|
Ship size: 12.25 x
9 x 7
inches,
weight 5 lbs |
|
2C |
Signal Mate Console Mount DIY
with Adjustable Mounting Handle, Manual, Extra Fuses, Strain
Reliefs, Grommets, Horn (with 1 foot of
wire) and LED light (with 2.5 feet of wire),
PLUS optional DIY Mounting Bracket (for
horn and light) |
SMK-SM-C-DIY-BRD |
MSRP:
$434.00 |
Now
$412.30 |
|
|
Ship size: 12.25 x
9 x 7
inches,
weight 5 lbs |
|
3 |
Signal Mate Portable with Horn, LED Light, Battery,
Charger, Stow Bag, Manual, Extra Fuses,
Strain Reliefs and Grommets |
SMK-SM-P
 |
MSRP:
$499.00 |
Now
$474.05 |
|
|
|
Ship size: 12.25 x
9 x 7
inches,
weight 12 lbs |
|
|
|
|
Navigation Lights |
| |
|
