5.5 Watt Tacoma 155 Power LED - Marine Ceiling Lights / Dimmable LED Lights
12 volt LED or 24 volt LED (10-30 Volts DC)

The Tacoma 155 Power LED recessed light is one of Imtra's latest additions to their advanced PowerLED range of light fixtures. Order below

It's lumen output matches most 20W halogen spots of similar size.

The Tacoma 155 LED fixture can be used for both interior and exterior applications while matching the LED color (Kelvin temperature) with any of our other products within the Imtra PowerLED family. This 155mm (6.1") recessed fixture, available in either cool white or warm white, screw-mounts to any fiberglass hard-top or interior headliner with ease, making it the ultimate interior and exterior selection.

The Tacoma 155 LED is dimmable when used with the power-saving Imtra IML PowerLED PWM Dimmer. A built-in dimmer interface allows for effortless touch-control dimming of up to 30 Tacoma PowerLED's.

With its high luminous flux light output, this LED fixture becomes the perfect choice for any install.

6.1" diameter Tacoma 155 Power LED
Stainless steel housing and trim ring
5.5 watts, Dimmable

Screw Mounted (see Avalon 155 Power LED for spring mount fixture of similar size)
 

Tacoma 155 Power LED Dimensions:

Screw Mounted fixture
(see Avalon 155 Power LED for spring mount fixture of similar size)
 

The Tacoma LED fixture, available in two sizes and two LED colors, can be used for both interior and exterior applications while matching the LED color (Kelvin temperature) with any of our other products within our PowerLED family. With it's high luminous flux light output, this LED fixture becomes the perfect choice for any install.

Imtra's carefully designed thermal management system results in maximum life with minimal lumens depreciation over its working life (appx 50,000 hrs). And like all of Imtra PowerLED spots & fixtures, the Ventura is 100% dimmable when used with Imtra's power-saving PWM momentary digital dimmer.

* WARM WHITE LED's produce a softer light output, whereas the COOL WHITE LED's are more of a pure white light (which can actually look bluish and is sometimes considered harsh, as with fluorescent lights). Depending on your application, most people prefer WARM white LED's (best for most applications).

Features and Benefits:

- SCREW mount installation
- Double gasket seals for superior water resistance
- Integrated drive electronics (no external driver)
- PWM dimmer interface for use with Optional Dimmer Module: ILIM80101
- Suitable for inflammable surfaces

Download Product Sheet from manufacturer for full details (pdf file).

Product Details
Trim Ring Finish: White or Stainless Steel
Trim Ring Material: Stainless Steel
Housing Material: Aluminum
Lens Material: Tempered sanded glass frosted lens
Trim Ring Dimensions: 6.1" (155mm)
Cut-out Diameter: 4.25" (135mm)
Recessed Depth: 1.13" (34mm)
Voltage: 10-30VDC
Power Consumption: 5.5W
LED Engine: 2 x 3W Cree LED
Beam Angle: 56°
Kelvin Temp.: 6400K for Cool White LEDs, or 2800K for Warm White LED
Lumen Output:
Integral Switch: No
Ingress Protection: IP65 for White or Stainless
Optional Dimmer Module: ILIM80101
Mounting Method: SCREW mount
Electrical Protections: Spikes (up to 200V)/Transient Protection
Manufacturer: Imtra
Weight: 0.50 lbs.