Underwater Thru-Hull Lights, Pool Lights, Container Lights
with flange/screw design,
12 volt or 24 volt DC or AC, halogen

Imtra Underwater Thru-Hull Lights
(Extended Life Halogen bulbs available in 12 or 24 volt)
 

Dimensions:

• 316TI Titanium Alloyed Marine Stainless Steel

• IP68 Protected

• Stainless Steel PG Gland and 10' "Siliconized" Supply Cable

• Uses high-intensity Halogen Reflector Lamps

• Clear Safety Glass

• Watertight Silicon Gasket

• 2 Year Warranty

• Made in Germany

• 12 VOLT OR 24 VOLT AC OR DC
   - can be powered by an appropriate low voltage transformer

For underwater use only, our thru-hull lights are made with a titanium alloy 316TI Stainless Steel which delivers an added level of corrosion resistance for marine applications.

Lights should not be installed more than 3m (9.5’) below the surface of the water.

If bulbs greater than 20W are installed the light MUST be used only when fully submerged in the water to ensure proper heat dissipation, as heat build up will deform the silicone gasket which forms water-proof seal. 

Make provisions to ensure back of light fixture is at least 50cm (20”) from any inflammable material.

NOTE: The silicone gasket should be replaced whenever a bulb is replaced.