Ventura Power LED - Yacht Ceiling Spot Lights / Dimmable LED Light
Optional Red Secondary LED for Night Vision / night-time navigation and chart reading
12 volt LED or 24 volt LED (10-30 Volts DC)

The Ventura PowerLED recessed spot light is a very powerful Imtra PowerLED ceiling spot light. Order below

The Ventura is brighter than most 20W halogen spots of similar size while using less than 75% of the energy.

Like all of the Imtra PowerLED spots & fixtures, the Ventura is 100% dimmable when used with the power-saving Imtra IML PowerLED PWM Dimmer. A built-in dimmer interface allows for effortless touch-control dimming of up to 30 Ventura PowerLED's.

Ventura's ultra thin bezel profile blends in nicely with hard or soft headliners. It is also styled to coordinate with the larger Avalon 105 LED Downlight and Avalon 155 LED Downlight.

Like other IML PowerLED spots, Ventura’s smooth aperture appearance without “hot spots” sets it apart from other LED spots on the market.

Dimensions:

Photometric Data from the manufacturer (Imtra):
Warm White Ventura Power LED Photometric Data (pdf file): Total Flux 188 Lumens
Cool White Ventura Power LED Photometric Data: Total Flux 182 Lumens
 

Imtra's carefully designed thermal mangement system results in maximum life with minimal lumens depreciation over its working life (appx 50,000 hrs). And like all of Imtra PowerLED spots & fixtures, the Ventura is 100% dimmable when used with Imtra's power-saving PWM momentary digital dimmer.

Ventura's ultra thin bezel profile blends in nicely with hard or soft headliners. Several finishes available along with choice of warm or cool LED output. The Ventura conveniently & firmly installs with self adjusting trap springs. Made in the USA and confidently offered with a 5 year warranty!

* WARM WHITE LED's produce a softer light output, whereas the COOL WHITE LED's are more of a pure white light (which can actually look bluish and is sometimes considered harsh, as with fluorescent lights). Depending on your application, most people prefer WARM white LED's (best for most applications).

Features and Benefits:

- Ultra flat stainless steel bezel
- High lumen output
- Solid-state circuitry
- Minimal power consumption
- Completely sealed LED sub-assembly
- Integrated drive electronics (no external driver)
- PWM dimmer interface

Download Product Sheet from manufacturer for full details (pdf file).

Product Details
Trim Ring Finish: White, Stainless Steel, or Brushed Stainless
Trim Ring Material: Stainless Steel
Lens: Frosted Glass
Trim Ring Dimensions: 3.18" (81mm)
Cut-out Diameter: 2.55" (65mm)
Recessed Depth: 1.14" (29mm)
Voltage: 10-30VDC
Power Consumption:
 5.5W for white LED Engine Cree LED
 2.5W for optional Red Luxeon LED*
Beam Angle: 83°
Kelvin Temperature:
 6400K for Cool White LED, or
 2800K for Warm White LED
Lumen Output:
 188 Lumens for warm white
 230 lumens for cool white
Integral Switch: No
Ingress Protection: IP65 for White or Stainless Steel, IP40 for Satin Nickel
Optional Dimmer Module: ILIM80101 **
Mounting Method: Spring-mount
Electrical Protections: Spikes (up to 200V)/Transient Protection
Manufacturer: Imtra
Weight: 0.340 lbs.

* An optional remote three-position switch may be used to toggle between the two different LED colors and full off.
** The optional dimmer can be controlled by an optional momentary push button switch to dim the white LED.