AA730 Wired Handheld Remote and Base Station

AA730 Wired Handheld Remote, Complete Kit Includes Base Station and Handheld with Cradle

by Imtra Marine Products

Was: $1,200.00

SailorSams Price: $855.30

You Save: $344.70

Quantity

Item ID:

spa-aa9209

Review this item

Description

AA730 Wired Handheld Remote, Complete Kit (Includes Base Station and Handheld with Cradle)

Hand held remote control and anchor rode kit complete with hand remote, base station, magnet and sensor, instructions and operators manual.

Note: When connecting to solid stage switching or other low current windlass drive, a PLC or AC variable frequency drive, a dummy resistor load may be required

Rope/Chaine Rode: Must have a minimum of 10 ft (3m) of chain. Chain must be galvanized steel. Rope should be a good quality nylon anchor rope. Type 66 or equivalent.

Click here to view the Owner's Manual.

Additional Information:

4 meter spiral cable
electrical protection against back-emf
Rubber over-moulding for shock protection and grip
Stowage on cradle
Operation in parallel with all AutoAnchor products
Connect to DC, AC and hydraulic systems
Rugged cable and connectors

Windlass Control with Chain Counter:

Presents the length of rode to deploy
Counts rope/chain or all-chain rode
Choice of measurement in feet, meters or fathoms
Logs windlass operating hours for maintenance
Easy calibration
Electronic diagnostics for troubleshooting installation
Auto stop and docking alarm when the anchor is close to docking
Two speed operation
Kit Includes: one handheld console unit with cradle, one base station, a deck socket with 2m lead, a socket sealing cap, one sensor, 2 magnets, screws for the cradle and socket, installation and operation instructions.

Product Specifications:

Voltage: 12V or 24V DC

Temperature Range: 23°F to 140°F (-5°C to 60°C)

Current Consumption: 50mA

Output Maximum Current Draw: 12VDC: 3.5A; 24VDC: 3.5A

Output Minimum Current Draw: 12VDC: 10mA; 24VDC: 20mA

Outputs: 6

Rode - Chain Only: Stainless or galvanized steel

EMC/Protection/CE: EN60945

DC Windlasses: A dual direction solenoid is required

Approximate Ship Weight (lbs): 3