Imtra 120 VAC Power Cord C Connector Kit | 3/8" LED Rope Light

Insert the rope lighting into the compression fitting. This inserts the power cords pins into the rope lighting to make contact with the wires embedded in the rope lighting. Tighten the compression fitting by hand. Then strip the other end of the cord and hard wire to your power source. The other end of the cord can be plugged in to a standard 120 vac outlet.

Power Cord has rectifier for 120VAC LED Rope Lights

Before you install your LED rope lights, connect the power and verify illumination. Then as you do your installation, beware of which end you need to feed the power to. LED rope lighting contains diodes that allow the electricity to flow in one direction only. Because of this, when you hook up power to the LED rope lighting, it may not illuminate. If this is the case, disconnect the power and reconnect it to the other end of the LED rope lighting.

• Description: Connector Kit for 3/8" 120VAC LED Rope Light
• Length: 6 ft.
• For use with: 120V rope light