Imtra 24 Volt AC Power Cord E Connector Kit | 3/8" LED Rope Light

Power Cord for 24 Volt AC Powered 24 Volt LED Rope Lights

Imtra 24 Volt AC Power Cord E Connector Kit | 3/8" LED Rope Light

by Imtra Marine Products

Was: $15.00

SailorSams Price: $13.50

You Save: $1.50

Quantity

Item ID:

ILMDL-CON24V-L6

Review this item

Description

Connector Kit for 3/8" 24VAC LED Rope Light when using Transformer (Connector, Rectifier & 6' Cord) 6' Power Cord for 24 Volt Rope Light.

Insert the LED rope lighting into the compression fitting. This inserts the power cords pins into the LED rope lighting to make electrical contact with the wires embedded in the LED rope lighting. Tighten the compression fitting by hand. Then strip the other end of the cord and hard wire to your power source (the 2 prong plug will be removed for use with a 24 volt power source).

Power Cord has rectifier for 24 Volt LED Rope Lights

Installation Note:

Before you install your LED rope lights, connect the power and verify illumination. Then as you do your installation, beware of which end you need to feed the power to. LED rope lighting contains diodes that allow the electricity to flow in one direction only. Because of this, when you hook up power to the LED rope lighting, it may not illuminate. If this is the case, disconnect the power and reconnect it to the other end of the LED rope lighting.