Side-Power SE30/125S-IP 12V, Single Prop IP Thruster - 30Kg/66Lb (2HP)

This new Ignition Protected model increases our range of IP models and is the perfect fit for stern thruster on smaller gas engine boats.

12V Thruster (Sealed Gearleg) with IP Housing, 12V, Ignition Protected, 125mm - 30Kg/66Lb Thrust (2HP)
Tunnel Size: 125mm/5"

(ON/OFF) IGNITION PROTECTED THRUSTERS (to ISO8846 Standard) - For use with Gas Engines

• Certified to ISO 8846 Ignition Protected standards
• Water proof (not recommended for fully submerged mounting)
• Sealed battery terminals on housing
• Sealed control cable connection on housing
• 1 meter control harness lead included
• Ignition protected housing retains serviceability for inside components
• Sealed gearleg
• Splined shaft for prop attachment

Product Specifications:

• Thrust @10.5VDC: 66 lbs (30kg)
• Voltage: 12VDC
• Manufacturer: Side-Power
• Thrust @12VDC: 88 lbs (40 kg)
• Typical Boat Size: 20-28' (6-8.5 m)
• Tunnel Diameter (I.D.): 4.92" (125 mm)
• Power @ 10.5V: 2 hp (1.5kw)
• Recommended Fuse Size: 150 Amp (SMANL150)
• Fuse Size: 150 Amp
• Minimum Battery Capacity: 380 CCA SAE
• Approximate Ship Weight (lbs): 29

Other items to consider when purchasing a new thruster:

• Bow Tunnel or Stern Tunnel
• Control Panels and Remote Controls
• AutoMainswitch, Battery Disconnect, Fuse & Fuseholder
• 4-Wire Harnesses (when not using AutoMainswitch)
• 5-Wire Harnesses (for use with AutoMainswitch)
• Installation Tools: SMTOOL-6MM, Ratching 6mm Allen Key Tool