Intervolt Switchmode Dimmer | 12V/200W & 24V/400W Dimmer Module

The Intervolt SLD Switchmode Dimmer contains all the features demanded by the marine, RV and motor coach enthusiast.

Designed for dimming DC (filament lamp) lighting circuits, and compatible with some LED products that lack specific built-in dimmer interface electronics.

Enclosed in a sleek, thermally-efficient marine-grade housing featuring a heavy duty corrosion resistant terminal block with insulated barriers to prevent shorting.

A selectable master/slave switch enables multiple units to be connected in parallel for unlimited power capacity!

These marine lighting dimmers are controlled by any "normally-open" single pole single throw momentary switches (any brand).

• Soft-start function:  Prolongs Bulb Filament Life
• Memory function that records last light-level setting so same brightness is resumed when turned on again
• Master/slave function that allows either dimmer to act as the master or the remote allowing unlimited power potential
• Multi Voltage Capable (9-33VDC)
• Supports unlimited numbers of momentary push-button switches
• Diagnostic indicator via color code LED (standby mode, load on, short circuit & over temperature warning
• Protections:  transient voltage, short circuit and over temperature

• Housing Finish/Material: Marine grade anodized aluminum with ABS-PC end caps
• Dimensions: 4.73 x 3.15 x 1.58 in. (120 x 80 x 40mm)
• Dimmer Type: Remote/Digital/Push-Button
• Input Voltage Range: 9-33VDC
• Power Capacity: 12V/200W, 24V/400W
• Power Stacking: Yes, unlimited
• Operating Temperature: -25 dg C to +45 dg C
• Dimming Voltage Range: 10-98% of input voltage
• Standby Current Draw: <10mA
• Complete Off: Yes
• Control Interface: Momentary Push-Button
• No. of Switches: Unlimited (not supplied with dimmer)
• Electrical Protections: Over-voltage, Over-temperature, Transients, Short Circuit
• Certifications & Compliance: CE-EMC - Australian C Tick (AS2064)
• Manufacturer: Amelec Australia
• Warranty: 2 Years